(OCXProperties)

In CygNet Studio, ActiveX control properties can be set on the control Property Sheet. Alternatively, many of the properties can also be set in the corresponding CygNet FMS * Control Properties dialog box, accessed via the property sheet.

Options to access CygNet FMS ActiveX control property configuration are as follows.

• Set property values directly on the CygNet Studio / ActiveX control Property Sheet
• For many properties, from the CygNet Studio / ActiveX control Property Sheet, double-click (OCXProperties) or click ... to access the CygNet FMS * Control Properties dialog box, and set values on the property pages provided.

See FMS ActiveX Controls for more information about using CygNet FMS ActiveX controls on CygNet Studio and CygNet Vision screens.

See CxHmiFms in the Scripting section for information about scripting FMS control objects.

Options are as follows.

• 0 - No
• 1 - Yes

Alternatively, use OCXProperties to access the Control Properties dialog box > General page and select/clear the Allow multiple selections check box to define.

Options are as follows.

• 0 - Flat
• 1 - 3D

Enter a known XML string.

Alternatively, use the CygNet FMS Dashboard Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > Dashboard page, then Display Properties) to define.

See Configuring Dashboard Display Properties for more information.

Acceptable values can be in one of the following forms.

• Absolute date (e.g. 1/31/2023)
• Relative date, which is an offset from the current day T (e.g. T-14 (14 days prior to today), or T+1 (one day following today)

Alternatively, use the CygNet FMS * Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > General page, then access the Start date selector) to define.

See Selecting Date and Time for more information.

Options are as follows.

• 0 — None
• 1 — Fixed Single

Enter desired button text.

Alternatively, use the CygNet FMS Node Chooser Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > General page and type desired text into the Button text text box) to define.

Allowable characters (maximum of 20) are A-Z, a-z, 0-9, . (period), #, $, &, (, ), +, -, \, /, :, <, >, =, @, [, ], ^, {, }, _ (underscore), !, ~ (tilde). Spaces are acceptable, when they are not leading or trailing.

Options are as follows.

• 0 - No
• 1 - Yes

Alternatively, use the CygNet FMS * Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > General page and select/clear the Allow multiple selections check box) to define.

Enter a filter string. Wildcard values * (multiple character) and ? (single character) are supported.

Alternatively, use the CygNet FMS * Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > General page and enter text into the Filter text box) to define.

Options are as follows.

• 0 - Name
• 1 - Description
• 2 - ID

Select a property type.

Alternatively, use the CygNet FMS * Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > General page and select the Name, Desc, or ID radio button) to define.

Note: See FilterType for usage of this property in the stand-alone CygNet FMS Node Chooser control.

Options are populated according to groups of the following types, as configured in your system.

• All Nodes - all Group Nodes
• General - General Group Nodes
• Station - Station Group Nodes
• By Category - by Category value, if configured for the Node

Alternatively, use the CygNet FMS * Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > General page and select a Node group from the selection tree) to define.

ChooserNodeCategorySelection

Options are a subset of the following possibilities, as applicable to the selected control. (Corresponding controls are noted in parentheses.)

• 1 - Node_Category1_Device (Dashboard, Jobs, Report)
• 1 - Node_Category2_Device (History Graph, History Grid)
• 1 - Node_Category3_Device (Exceptions)
• 1 - Node_Category4_Device (Close Period)
• 1 - Node_Category5_Device (Configuration, Raw Device Data)
• 2 - Node_Category1_Group (Dashboard, Jobs, Report)
• 2 - Node_Category3_Group (Exceptions)
• 2 - Node_Category4_Group (Close Period)
• 3 - Node_Category1_Station (Dashboard, Jobs, Report)
• 3 – Node_Category2_Station (History Graph, History Grid)
• 3 - Node_Category3_Station (Exceptions)
• 3 - Node_Category4_Station (Close Period)
• 3 - Node_Category6_Station (Balance)
• 6 - Node_Category1_Any (Dashboard, Jobs, Report)
• 6 - Node_Category3_Any (Exceptions)
• 8 - Node_Category1_Gas_Device (Dashboard, Jobs, Report)
• 8 – Node_Category2_Gas_Device (History Graph, History Grid)
• 8 - Node_Category3_Gas_Device (Exceptions)
• 8 - Node_Category4_Gas_Device (Close Period)
• 8 - Node_Category5_Gas_Device (Configuration, Raw Device Data)
• 9 - Node_Category1_Liquid_Device (Dashboard, Jobs, Report)
• 9 – Node_Category2_Liquid_Device (History Graph, History Grid)
• 9 - Node_Category3_Liquid_Device (Exceptions)
• 9 - Node_Category4_Liquid_Device (Close Period)
• 9 - Node_Category5_Liquid_Device (Configuration, Raw Device Data)
• 9 - Node_Category6_Liquid_Device (Balance)
• 13 - Node_Category1_Accessory (Jobs, Report)
• 13 - Node_Category3_Accessory (Exceptions)
• 16- Node_Category6_Any_Balance (Balance)
• 17- Node_Category6_Station_Group (Balance)

Enter the string value.

Alternatively, use the CygNet FMS * Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > General page and select a value from the Category drop-down menu) to define.

Options are as follows.

• 0 - No
• 1 - Yes

Alternatively, use the CygNet FMS * Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > General page and select/clear the Allow Node category selection check box) to define.

Options are as follows.

• 0 - Type ascending
• 2 - Name ascending
• 3 - Description ascending
• 4 - Type descending
• 5 - Name descending
• 6 - Description descending

Alternatively, use the CygNet FMS * Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > General page and select a value from the Primary column drop-down menu) to define.

Enter a valid FMS service in the format Site.Service.

Alternatively, use the CygNet FMS * Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > General page and then FMS service to access the Select Service dialog box) to define.

Options are as follows.

• 0 - No
• 1 - Yes

Alternatively, use the CygNet FMS * Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > General page and select/clear the Allow FMS service selection check box) to define.

Enter a known XML string.

Alternatively, use the CygNet FMS * Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > Commands page) to define.

See FMS Commands for more information.

Options are as follows.

• 0 - No
• 1 - Yes

Alternatively, use the CygNet FMS History Grid Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > Grid page and select/clear the Color rows containing exceptions check box) to define.

In the CygNet FMS History Grid control, specifies the color mode option for displaying selected data in the grid

Options are as follows.

• 0 - None
• 1 - Row background
• 2 - Row text
• 3 - Date/Time background
• 4 - Date/Time text

Selection of a value other than "0 - None" enables definition of the MaxDataQuality, ColorExceptions, and HighlightExceptionCells properties.

Alternatively, use the CygNet FMS History Grid Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > Grid page and access the Color mode selector) to define.

See Using the History Grid Control for more information.

In the CygNet FMS History Graph control, returns/sets how colors are applied on the grid, whether to individual Nodes or based on acceptability (data quality) level

Options are as follows.

• 0 - ColorModeSingleNode
• 1 - ColorModeAcceptability

Use ColorXml to define background, line, and data quality colors for display in the graph.

Enter a known XML string.

Alternatively, use the CygNet FMS History Graph Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > Colors page) to define.

Enter a known XML string.

Alternatively, use the CygNet FMS * Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > Control page, then Columns selector) to define.

Enter number of seconds.

Alternatively, use the CygNet FMS Dashboard Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCXProperties) > Dashboard page, then in the Show as fixed columns: list, when the Custom columns option is selected, enter a value in the Update interval text box) to define.

See Using the Dashboard Control for more information.

In the CygNet FMS Dashboard, History Graph, and History Grid controls, specifies the data level to display in the control.

In the CygNet FMS Dashboard control, specify the data mode (level of data) for viewing summary data in the control; options are as follows:

• 1 - Device_Mode - Device data
• 3 - Station_Mode - Station data

In the CygNet FMS History Graph and History Grid controls, specify the data mode to use for a station meter Node (a gas meter Node set to also function as a station) [supersedes the deprecated MeterStationView property]; options are as follows:

• 1 - Device_Mode - Device data
• 3 - Station_Mode - Station data

Alternatively, use the CygNet FMS Dashboard Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCXProperties) > Dashboard page, then select a Data mode value from the drop-down menu) to define.

Enter a known XML string.

Alternatively, use the CygNet FMS Balance Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > Balance page, then Data quality color selector) to define.

In the CygNet FMS Configuration, Dashboard, and Raw Data controls, specifies the type of data view to display in the selected control

In the CygNet FMS Configuration control, specifies the data type to display in the control; options are as follows:

• 0 - Data_View_Config - Configuration
• 1 - Data_View_Gas_Analysis - Gas analysis

In the CygNet FMS Dashboard control, specifies the data view option to display in the data grid, depending on the DataMode value (device-level or station-level records) selected [supersedes the deprecated VisibleAttribute property]; options are as follows:

When DataMode property is set to 1 - Device_Mode, data view options are as follows.

• 0 - DataQuality - Data quality
• 1 - HasConfig - Configuration poll
• 2 - OpenExceptions - Open exceptions
• 3 - LinkExceptions - Linked exceptions
• 4 - EditState - Edit state
• 5 - CollectStatus - Collection status
• 6 - CollectStatusDetail - Collection details
• 7 - ExportStatus - Raw data export
• 8 - AnalystOverview - Analyst overview

When DataMode property is set to 3 - Station_Mode, valid data view options are as follows.

• 0 - DataQuality - Data quality
• 2 - OpenExceptions - Open exceptions
• 4 - EditState - Edit state
• 8 - AnalystOverview - Analyst overview

See Data view in the Using the Dashboard Control topic for more information about available data view options.

In the CygNet FMS Raw Data control, specifies the data view options to display [supersedes the deprecated DisplayMode property]; options are as follows:

• 1 - AlarmEntry
• 11 - ConfigLogRaw
• 20 - EventEntry
• 27 - GasQualityRaw
• 25 - MeteringRaw
• 57 - BatchRaw
• 112 - TicketRaw

See Data view in the Using the Raw Data Control topic for more information about available data view options.

Alternatively, use the CygNet FMS [control name] Control Properties dialog box to define:

1. From the Property Sheet > ActiveX page, double-click (OCXProperties) (or click ...) to access the CygNet FMS * Control Properties dialog
2. In the control properties dialog, select the [control name] page.
3. On the control page, select a Data view value from the options in the drop-down menu.

Options are as follows.

• 0 - Device_Time - Device
• 1 - Contract_Time - Contract
• 2 - Local_Time - Local

Alternatively, use the CygNet FMS * Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCXProperties) > General page and access the Format selector) to define.

Options are as follows.

• 0 - LeadingTime - Leading time
• 1 - TrailingTime - Trailing time

Alternatively, use the CygNet FMS * Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCXProperties) > [control] page, then Date display selector) to define.

Acceptable values include 0 - 10 decimal places.

Alternatively, use the CygNet FMS * Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCXProperties) > [control] page, then Decimal precision selector) to define.

In the CygNet FMS Raw Data control, specifies the data view to display

See DataView for details.

Specifies the end date for data to display in the control

Acceptable values can be in one of the following forms.

• Absolute date (e.g. 1/31/2023)
• Relative date, which is an offset from the current day T (e.g. T-14 (14 days prior to today), or T+1 (one day following today))

Alternatively, use the CygNet FMS * Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCXProperties) > General page and access the End date selector) to define.

See Selecting Date and Time for more information.

Enter a known XML string.

Alternatively, use the CygNet FMS * Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > Control page, then Filterselector to define.

Valid values are as follows for each control.

In the CygNet FMS Alarm control:

Filter options are as follows.

• Entry - Event generated
• User - User generated

Default value is all selected.

In the CygNet FMS Configuration control:

Filter options are as follows.

• Device - polled from a device
• Device file - imported from a device-generated file
• Event generated - data changed due to an event
• Imported - imported from other measurement system files
• Linked gas quality - data from linked gas quality sources
• System generated - system-generated data for non-history records
• User entered - user-entered or edited, but not replacing calculated values
• User file - imported from user-generated files

Default value is all selected.

In the CygNet FMS Dashboard control:

Filter options depend on the Data view selected. See Configuring Dashboard Filters for more information.

In the CygNet FMS Exceptions control:

Filter options are as follows.

Show exceptions with status:

• Open
• Ignored
• Resolved manually
• Resolved automatically

Show exceptions of type:

• Gas device
• Gas station
• Gas configuration
• Gas analysis
• Liquid metering
• Liquid configuration
• Job

Default value is "Open" status exceptions, of all exception types listed.

See the corresponding ActiveX control usage topic (CygNet FMS Alarm Control, CygNet FMS Configuration Control, CygNet FMS Dashboard Control, CygNet FMS Exceptions Control) and control properties topic (CxFmsAlarmLogCtrl Properties, CxFmsConfigCtrl Properties, CxFmsDashboardCtrl Properties, CxFmsExceptionsCtrl Properties) for more information about filter selection options.

Enter a filter string. Wildcard values * (multiple character) and ? (single character) are supported.

Alternatively, use the CygNet FMS Node Chooser Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCXProperties) > General page, then enter text into the Filter text box) to define.

Options are as follows.

• 0 - Name
• 1 - Description
• 2 - ID

Alternatively, use the CygNet FMS Node Chooser Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCXProperties) > General page, then select the Name, Desc, or ID radio button) to define.

Click ... to access the Font dialog box to make font selections including type, style, size, and script options.

Options are as follows.

• 0 - Large
• 1 - Medium
• 2 - Small

Alternatively, use the CygNet FMS History Graph Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCXProperties) > Graph page, then Font Size selector) to define.

Enter a known XML string.

Alternatively, use the CygNet FMS Exceptions Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCXProperties) > Exceptions page, then Grid groups selector) to define.

Options are populated according to groups of the following types, as configured in your system.

• All Nodes - all Group Nodes
• General - General Group Nodes
• Station - Station Group Nodes
• By Category - by Category value, if configured for the Node

Alternatively, use the CygNet FMS Node Chooser Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCXProperties) > General page and select a Node group value from the selection tree) to define.

Enter a pixel value for the table height.

Options are as follows.

• 0 - No
• 1 - Yes

Alternatively, use the CygNet FMS History Grid Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > Grid page and select/clear the Highlight cells causing exceptions check box) to define.

In editable CygNet FMS controls (Alarm, Configuration, History Grid), returns whether or not the user is currently editing data

Alternatively, use the CygNet FMS Jobs Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > Jobs page, then Job type selector) to define.

Options are as follows.

• <Any>
• Auto-calibration
• Calibration
• Gas Sample
• [User-supplied value options]

Color will be applied to records in the control with lower data quality than this selected value, according to the color mode value defined by the ColorGrid property.

Enter a known data quality value.

Alternatively, use the CygNet FMS History Grid Control Properties dialog box (from the Property Sheet ActiveX page, click (OCX Properties) > Grid page, then Color data quality below selector) to define.

Possible values for this property are as configured in your system, via the Admin menu. See Configuring Data Quality Settings for more information.

Alternatively, use the CygNet FMS Exceptions Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCXProperties) > Exceptions page, then Max exceptions per node text box) to define.

In the CygNet FMS History Graph or History Grid controls, specifies the data mode to be displayed for a Node that is a station meter (a Gas Meter Node set to also function as a station)

See DataMode for details.

Options are as follows.

• 1 - Node_Category1_Device
• 2 - Node_Category1_Group
• 3 - Node_Category1_Station
• 6 - Node_Category1_Any
• 8 - Node_Category1_Gas_Device
• 9 - Node_Category1_Liquid_Device
• 13 - Node_Category1_Accessory

Alternatively, use the CygNet FMS Node Chooser Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCXProperties) > General page and select a value from the Node category drop-down menu) to define.

Options are as follows.

• 0 - No
• 1 - Yes

Alternatively, use the CygNet FMS Node Chooser Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCXProperties) > General page and select/clear the Allow Node category selection check box) to define.

Alternatively, use the CygNet FMS Report Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCXProperties) > General page, then (with the Use Session Node check box cleared) enter a Node name into the Node text box) to define.

Acceptable values can be in one of the following forms.

• Absolute Date/Time (e.g. 1/31/2023 7:10:14 AM)
• Relative Date/Time (e.g. y-1 m-2 d=15 H=5 M=30 S=0)
• Relative Day, which is an offset from the current day T (e.g. T-10)

Alternatively, use the CygNet FMS * Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCXProperties) > General page, then select the Use Point in Time mode check box, and select a PIT (C) value using the date and time selector) to define.

See Using the Home Menu for more information about PIT mode.

See Selecting Point in Time for more information about time selection.

Options are as follows.

• 0 - Type ascending
• 2 - Name ascending
• 3 - Description ascending
• 4 - Type descending
• 5 - Name descending
• 6 - Description descending

Alternatively, use the CygNet FMS Node Chooser Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCXProperties) > General page and select a value from the Primary column drop-down menu) to define.

Enter a known XML string.

Alternatively, use the CygNet FMS History Graph Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCXProperties) > Graph page, then in the Process Variables: section click Modify... to access the Process Variables configuration list) to define.

Options are as follows.

• 0 - Oldest_First
• 1 - Newest_First

Alternatively, use the CygNet FMS * Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCXProperties) > Control page, then Record order selector) to define.

Options are as follows.

• 1 - Hourly
• 2 - Daily
• 3 - Native - appears for Device data view only; not applicable to Station data view

Alternatively, use the CygNet FMS History * Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCXProperties) > Control page, then Record span selector) to define.

Enter a known XML string.

Alternatively, use the CygNet FMS Report Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCXProperties) > Report page, then select a report type and access the Report parameters definitions) to define.

See Managing Report Definitions for more information.

Enter a known report name.

Alternatively, use the CygNet FMS Report Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCXProperties) > Report page, then use the Type drop-down menu) to define.

Options are as follows.

• 0 - SingleClick
• 1 - DoubleClick

Alternatively, use the CygNet FMS Dashboard Control Properties dialog box (from the Property Sheet ActiveX page, click (OCX Properties) > Dashboard page, then use the Set Session Node drop-down menu) to define.

Specifies the Session start date for the time window displayed in the control, when using the Session options

Acceptable values can be in one of the following forms.

• Absolute date (e.g. 1/31/2023)
• Relative date, which is an offset from the current day T, e.g. T-14 (14 days prior to today), or T+1 (one day following today)

See Selecting Date and Time for more information.

Options are as follows.

• 0 - Device_Time
• 1 - Contract_Time
• 2 - Local_Time

Specifies the Session end date for the time window displayed in the control, when using the Session options

Acceptable values can be in one of the following forms.

• Absolute date (e.g. 1/31/2023)
• Relative date, which is an offset from the current day T, e.g. T-14 (14 days prior to today), or T+1 (one day following today)

See Selecting Date and Time for more information.

This tag must be in the form SITE.SERVICE|ID (for example, TEST.FMS|2540).

Use the pop-up color selector in the property sheet to define a cell color.

Alternatively, use the CygNet FMS * Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCXProperties) > Control page, then select/clear the Shade background (cell) check box) to define.

See Configuring Color for more information.

Use the pop-up color selector in the property sheet to define a text color.

Alternatively, use the CygNet FMS * Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCXProperties) > Control page, then select/clear the Shade foreground (text) check box) to define.

See Configuring Color for more information.

Options are as follows.

• 0 - No
• 1 - Yes

Alternatively, use the CygNet FMS Jobs Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCXProperties) > Jobs page, then in the Display the following job statuses: list, select/clear the Approved check box) to define.

Options are as follows.

• 0 - No
• 1 - Yes

Alternatively, use the CygNet FMS Jobs Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCXProperties) > Jobs page, then in the Display the following job statuses: list, select/clear the Blocked check box) to define.

Options are as follows.

• 0 - No
• 1 - Yes

Alternatively, use the CygNet FMS * Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > General page, and select/clear the Show Chooser pane check box) to define.

Options are as follows.

• 0 - No
• 1 - Yes

Alternatively, use the CygNet FMS Jobs Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCXProperties) > Jobs page, then in the Display the following job statuses: list, select/clear the Completed check box) to define.

Options are as follows.

• 0 - No
• 1 - Yes

Alternatively, use the CygNet FMS Dashboard Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > Dashboard page, then in the Show as fixed columns: list, select/clear the Custom columns check box) to define.

Options are as follows.

• 0 - No
• 1 - Yes

Alternatively, use the CygNet FMS Dashboard Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > Dashboard page, then in the Show as fixed columns: list, select/clear the Exception count check box) to define.

Options are as follows.

• 0 - No
• 1 - Yes

Alternatively, use the CygNet FMS Balance Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > Balance page, and select/clear the Show daily and monthly rollups only check box) to define.

Selected means hourly records will not be shown (ShowHourly = 0 - No); cleared means hourly records will also be shown (ShowHourly = 1 - Yes).

Options are as follows.

• 0 - No
• 1 - Yes

Alternatively, use the CygNet FMS History Graph Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > Graph page, and select/clear the Show legend check box) to define.

Options are as follows.

• 0 - No
• 1 - Yes

Alternatively, use the CygNet FMS Jobs Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCXProperties) > Jobs page, then in the Display the following job statuses: list, select/clear the Missing Data check box) to define.

Options are as follows.

• 0 - No
• 1 - Yes

Options are as follows.

• 0 - No
• 1 - Yes

Alternatively, use the CygNet FMS Dashboard Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > Dashboard page, then in the Show as fixed columns: list, select/clear the Node description check box) to define.

Options are as follows.

• 0 - No
• 1 - Yes

Alternatively, use the CygNet FMS Dashboard Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > Dashboard page, then in the Show as fixed columns: list, select/clear the Node priority check box) to define.

Options are as follows.

• 0 - No
• 1 - Yes

Alternatively, use the CygNet FMS Jobs Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCXProperties) > Jobs page, then in the Display the following job statuses: list, select/clear the Open check box) to define.

Options are as follows.

• 0 - No
• 1 - Yes

Alternatively, use the CygNet FMS * Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > General page, and select/clear the Show Options pane check box) to define.

Options are as follows.

• 0 - No
• 1 - Yes

Alternatively, use the CygNet FMS Jobs Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCXProperties) > Jobs page, then in the Display the following job statuses: list, select/clear the Pending Approval check box) to define.

Missing data means records with anything other than a "Good" or "Partial" collection status value.

Options are as follows.

• 0 - No
• 1 - Yes

Alternatively, use the CygNet FMS Dashboard Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > Dashboard page, then in the Show as fixed columns: list, select/clear the % missing data check box) to define.

Options are as follows.

• 0 - No
• 1 - Yes

Alternatively, use the CygNet FMS Jobs Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCXProperties) > Jobs page, then in the Display the following job statuses: list, select/clear the Review check box) to define.

Options are as follows.

• 0 - None
• 1 - Foreground
• 2 - Background
• 3 - Both

Alternatively, use the CygNet FMS * Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > [control] page, then select/clear the Shading foreground (text) and/or Shading background (cell) check box) to define.

Options are as follows.

• 0 - No
• 1 - Yes

Alternatively, use the CygNet FMS * Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > [control] page, then select/clear the Show units check box) to define.

Options are as follows.

• 0 - No
• 1 - Yes

Options are as follows.

• 0 - No
• 1 - Yes

Alternatively, use the CygNet FMS Jobs Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCXProperties) > Jobs page, then in the Display the following job statuses: list, select/clear the Verified check box) to define.

Options are as follows.

• 0 - No
• 1 - Yes

Alternatively, use the CygNet FMS Jobs Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCXProperties) > Jobs page, then in the Display the following job statuses: list, select/clear the Waiting for Events check box) to define.

Enter a valid FMS service in the format Site.Service.

Alternatively, use the CygNet FMS PPA Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > General page and then FMS service to access the Select Service dialog box) to define.

Enter a valid FMS service in the format Site.Service.

Alternatively, use the CygNet FMS Node Chooser Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > General page and then FMS service to access the Select Service dialog box) to define.

Options are as follows.

• 0 - No
• 1 - Yes

Alternatively, use the CygNet FMS Node Chooser Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > General page and select/clear the Allow FMS service selection check box) to define.

Enter a known unit set name.

Alternatively, use the CygNet FMS * Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > [control] page and select a configured Unit set from the drop-down menu) to define.

See Configuring Unit Set Definitions for more information.

Options are as follows.

• 0 - No
• 1 - Yes

Options are as follows.

• 0 - No
• 1 - Yes

Options are as follows.

• 0 - No
• 1 - Yes

Alternatively, use the CygNet FMS * Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > General page and select/clear the Use Point in Time mode check box) to define. If selected, define a PITDateTime value.

Options are as follows.

• 0 - No
• 1 - Yes

Alternatively, use the CygNet FMS * Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > General page, and select/clear the Use Session Node check box) to define.

Options are as follows.

• 0 - No
• 1 - Yes

Alternatively, use the CygNet FMS * Control Properties dialog box (from the Property Sheet, ActiveX page, click (OCX Properties) > General page, and select/clear the Use Session options check box) to define.

Note: This property deprecated in favor of DataView

In the CygNet FMS Dashboard control, specifies the data view for displaying summary data in the control

See DataView for details.